This unit is a direct replacement for the SuperWinch 719627.
This Electric Tarp Motor features 1.8HP (1345watts), 90:1 Gear Ratio, 45 RPM Output Speed, and 94 lb-ft of Torque. Our 3/4" x 2 1/4" shaft features the standard hole for Front-to-Back Systems and a keyway for side roll, cable kits, and other applications where that is needed. Works with 3, 4, or 5 bolt mounting patterns. We are so confident in this unit that we back it up with our industry-leading 5-Year Warranty. You will NOT be disappointed in the torque, durability, or flexibility of this motor.
- Motor Type: Direct Drive
- Gear Ratio: 90:1
- Voltage: 12
- Horsepower: 1.8
- Torque: 94 lb-ft
- Chrome Motor Cover Included
- 5-Year Warranty Included (Opening, separating, or otherwise tampering with motor and gearbox will void your warranty.)
SuperCinch Motors have three 5/16"-18 x 1/2" deep mounting holes on the output shaft side of the gearbox. All three mounting holes should be used when mounting the direct drive motor unit to the bulkhead.
The gearbox has a 3/4" diameter output shaft with a 5/16" diameter through the hole. To minimize stress on your motor and gearbox, avoid the use of oscillating loads and attach tubes as straight as possible to the output shaft.
Complete a thorough check and installation of all wiring while all cables are unattached. Where necessary, securely fasten all wiring to the adjacent structure using cable ties
The recommended gauge of wire: 6 Gauge
Due to electric motor efficiency and electric power available from your vehicle's battery or alternator, these units are rated for intermittent use. Use the SuperCinch Motor for short periods of time only, allowing it to cool between uses. If your motor becomes too hot to touch, stop operation and allow it to cool.