K-PAT-4SP-GL
This is a complete bolt-on kit. (no welding required)
This Kit Does Not Contain a Tarp, Wind Deflector, or Housing.
This is a 100% complete 4 Spring Polished Aluminum Manual Front to Back Flip Tarp System for your Dump Truck or Trailer up to 23'. The Polished Aluminum Arms will never rust and are 40% lighter than steel arms.
- (1) Crank Box for Ground Level Crank Control
- (1) #40 Chain, 12' long for Ground Level Crank
- (1) 14" Sprocket Bar
- (1) Fully Adjustable Aluminum Tarp Axle from 93"-110"
- (2) Aluminum Tarp Spool Mounting Brackets
- (2) Axle Bearings With Flanges
- (1) 103" Cross Tube
- (2) 93" Aluminum Upper Control Arms with 90° Corners
- (2) 93" Aluminum Lower Control Arms
- (2) 4-Spring Pivot Pins with an Outside Diameter of 3.700"
- (8) Spiral Torsion Springs
- (2) Plastic Tarp Centering Flanges
- Chain Guards are NOT included UNLESS chosen as an accessory.
- All Necessary Hardware for Installation
For tarp size, please measure inside to inside of where the axle will be mounted, subtract 4" and that will be your width. For length, please measure from where the axle will be to the tailgate, then add 2'.